Brocade Mobility 7131N-FGR Access Point Installation Guide (Supporting software release 4.0.0.0-035GRN and later) - Manual (Page 37)

Configuring basic device settings
3
Brocade Mobility 7131N-FGR Access Point Installation Guide 29
53-1001948-01
3. Refer to the AP-71xx System Settings field to define the following parameters:
a. Assign a System Name to define a title for this access point. The System
Name is useful if multiple devices are being administered.
b. Select the Country for theBrocade Mobility 7131N-FGR Access Point’s
country of operation. The access point prompts for the correct country
code on the first login. A warning message also displays stating an
incorrect country setting may result in illegal radio operation. Selecting the
correct country is central to legally operating the access point. Each
country has its own regulatory restrictions concerning electromagnetic
emissions and the maximum RF signal strength that can be transmitted.
To ensure compliance with national and local laws, set the country
accurately.
AP7131N_InstallationGuide.book Page 29 Tuesday, August 24, 2010 5:09 AM