Brocade Mobility 7131N-FGR Access Point Installation Guide (Supporting software release 4.0.0.0-035GRN and later) - Manual (Page 34)

Configuring the access point
3
26 Brocade Mobility 7131N-FGR Access Point Installation Guide
53-1001948-01
1. Start a browser and enter the following IP address in the address field:
https://10.1.1.1
NOTE
For optimum compatibility, use Sun Microsystems’ JRE 1.6 or higher (available from
Sun’s Website), and be sure to disable Microsoft’s Java Virtual Machine if installed.
NOTE
The computer being used should be configured to use the same IP address and
subnet mask as the access point.
The login screen displays.
1. Log in using admin as the default User ID and admin123 as the default
password. If the default login is successful, the Change Admin Password
screen displays.
2. Change the password to ensure theBrocade Mobility 7131N-FGR Access Point
is using a secure password different from the default password. The new
password must be at least 8 characters in length.
AP7131N_InstallationGuide.book Page 26 Tuesday, August 24, 2010 5:09 AM