Brocade Mobility 7131N-FGR Access Point Installation Guide (Supporting software release 4.0.0.0-035GRN and later) - Manual (Page 36)

Configuring basic device settings
3
28 Brocade Mobility 7131N-FGR Access Point Installation Guide
53-1001948-01
NOTE
Beginning with the 4.0 release of the access point firmware, a new scheme for radio
configuration and WIPS server management has been implemented within the Quick
Setup GUI applet. These radio buttons define how WLAN and sensor functionality are
supported amongst the radios available to the access point. The options available
depend on the SKU supported (and are described within this section).
To define a basic access point configuration:
1. Select System Configuration -> Quick Setup from the menu tree, if the Quick
Setup screen is not already displayed.
2. Select the System Configuration tab to define the access point’s system, WIPS
server and radio configuration.
NOTE
The WIPS Server designation and radio configuration can be defined as part of the
access point’s quick setup. For a description of sensor functionality and how it
relates to access point operation, refer to the Brocade Mobility 7131 Series Access
Point Product Reference Guide available at the Brocade Web site.
AP7131N_InstallationGuide.book Page 28 Tuesday, August 24, 2010 5:09 AM