Avocent DSView - Manual (Page 60)

54 DSView Installer/User Guide
Video scaling
At times, a user may connect to a computer running at a higher resolution than
that configured at the user’s remote system. When this occurs, the host system
will be displayed in a DSView window with scroll bars. The host resolution will
remain the same and users may scroll to the areas that fall outside of the frame.
If a user wishes to display the host system’s entire screen, it may be scaled to
fit within the current resolution with the scaling tools.
Mouse alignment
Because DSView cannot get constant feedback from the mouse, there are times
when the mouse on the DS appliance system may lose sync with the mouse on
the host system. When this occurs, users may resync the mouse by clicking on
the Mouse Align button. In most cases, this will correct the problem.
Mouse Align
Figure 4.8: The Mouse Align Button
Updating Firmware
The firmware on attached DS appliances may be updated using File - Update
Firmware. All DS appliances of the same model type may be updated at the
same time. To update a different DS appliance model, you will need to perform
the following process again when the current model update is completed.
NOTE: When updating the CPS810 or CPS1610 appliances, application image updates must
be performed prior to boot image updates.