Avocent DSView - Manual (Page 57)

Chapter 4: Advanced Options 51
Figure 4.6: Video Adjustments Dialog Box Figure 4.7: Video Adjustments Dialog Box
(Standard Video Compression) (DSR DVC Upgrade)
Modified video settings are written to the target device. Settings are also stored
per port/channel session on a system when they are made and saved so they
may be used during a non-shared session as follows:
• If sharing is not enabled, the video settings made on the local DS/DSR
appliance during the session are used.
• If sharing is enabled, video settings are read from the target device.
See Sharing a Device Session in Chapter 3 for more information on
session sharing.
Users may verify the level of packets per second required to support a static
screen by observing the packet rate which is located in the lower right-hand
corner of the dialog box.
The following sections describe the effects of the video adjustments. Clicking
OK after modifying any adjustment saves the changes.
Image position
If DSView and target device mouse cursors do not align exactly when you select
the Mouse - Align function, video centering may be needed using the Image
Position settings. Generally, only a few increments are required.