Avocent DSView - Manual (Page 17)

Chapter 2: Installation 11
7. When the DSAuth Server has finished installing, a system reboot is required.
Installing DSAdmin
DSAdmin is the administrative front end for the DSAuth Server that is used to
configure user information and access levels. DSAdmin can be installed on the
same machine as the DSAuth Server, or on a separate machine and then con-
nected to the DSAuth Server through the network.
During the installation, a window will appear; enter the name or IP address
of the PC where the DSAuth Server is installed. This will be your primary
DSAuth Server. Also, if you are installing a non-English version of the DS
Management Software, you will be prompted for the name of a default
user setting.
To install from the CD:
1. Log on to the PC as Administrator.
2. Insert the DS Management Software CD. An autorun file will bring up a
menu of installation options.
3. When prompted to select a program to install, select Install DSAdmin. The
software will check the Avocent web site to ensure you have the latest
version of the DSAdmin software. If a newer version is found, it will be
automatically downloaded. The installation will then begin.
4. Follow the on-screen instructions.
To install using the DS Management Software downloaded
from Avocent:
1. Log on to the PC as Administrator.
2. Using your DS appliance’s installer/user guide and quick install guide,
download the DS Management Software from the Avocent web site (Go to
www.avocent.com and click the Support link. On the Technical Support
page, click the Product Upgrades link.).
3. Double-click on the executable downloaded from Avocent. The installation
will begin.
4. Follow the on-screen instructions.