Pro-Cut Warthog - Manual (Page 60)

PG / Ø60 800.543.6618
SERVICE CORRIDOR CONCEPT
Plug in the power cord, turn on the tablet PC, log in to Windows if necessary and launch the GYR applica-
tion by selecting the GYR icon.
The GYR application will show the most recent vehicle
that was serviced, if this is not correct, you will need
to enter the new vehicle information with the scanner.
Once the GYR components are set up and tested, you’re ready to begin the brake service. The steps are simple,
sequential, and the program will guide you through the process giving you help along the way. We call this the
service corridor.
To Begin:
1.
2.
2010 Dodge Charger Police Package is selected in this example» SCREEN
Scan the vehicle’s bar code VIN plate or label, normally
found in the driver’s side door jamb. The red scan line
will change to a green dot and the scanner will beep
when you have successfully scanned the VIN.
Insert repair order, technician name, mileage of the
vehicle, and causal code if any using the drop down
keypad on the touch screen.
Select the appropriate front or rear wheel you are ser-
vicing
Touch the “Begin” square on the touch screen. 3.
4.
5.
6.