Pro-Cut Warthog User Manual
Page 44
PG /
Ø44
800.543.6618
THE 50-1200 CUTTING HEAD
Detail of small adjust-
ment lines 0.001"/
0.025mm depth and
each large line of 0.002"
/ 0.050mm depth.
Unlike Pro-Cut's earlier designs, this cutting head's arms move from side to side. The adjustment knobs face the
user. The depth adjustment dials are offset as a reminder - the one nearest you
(AA) adjusts the outboard (away
from vehicle) depth of cut and the one farther from you
(BB) adjusts the inboard (nearest to vehicle) depth of cut.
Detail of outboard adjustment knob (AA) and inboard adjustment knob (BB)
The dial knobs have small and large lines. Each small
line is 0.001"[0.025mm] depth and each large line is
0.002"[0.050mm] depth. Each full turn of these knobs
moves the arm almost 0.050"[1.25mm] - nearly twice what
the older style cutting heads removed per turn, so please
take care not to cut too deeply by accident.
AA
BB