Yokogawa DR240 - Manual (Page 97)

7-21 IM DR231-11E
Output Format
7
Extended format for the monthly report
If the monthly report is set to ON2, extended daily report is output in the following format with
the command, TS4+device trigger(GET)+RF2.
Data
length
Year Month Day Hour Minute 0
A1 B1 C1 D1
An Bn Cn Dn
Number of output bytes
Time when the report is created
First channel
Last channel
A1 to An: Report channel number
(DR130:00H to 1DH, other: 00H to 3BH)
B1 to Bn: Unit number (Fixed to 80H during computation)
C1 to Cn: Channel number*
D1 to Dn: Report computation type
*: Computation channels are
00H to 1DH for stand-alone type
00H to 3BH for extended type
0
Extension
number
Power failure data 0: no failure 1:failure occurred 0 or 1
A1
An
A1
An
A1
An
E1 F1 G1 Data H1
En Fn Gn Data Hn
E1 F1 I1 Data J1
Data Jn
E1 F1 K1 Data L1
Data Ln
En Fn In
En Fn Kn
Report computation data for each report channel
A1 ot An: Report channel number
(DR130:00H to 1DH, other: 00H to 3BH)
E1 to En:
Type of the report computation result to output
F1 to Fn: Report computation data status
G1 to Gn, l1 to ln, K1 to Kn:
Mantissa of the report computation data
Data H1 to data Hn:
Mantissa of the report computation data
Data J1 to data Jn:
Mantissa of the report computation data
Data L1 to data Ln:
Mantissa of the report computation data
Starting date and time of the REPORT
Instantaneous value, average value
or summed value
Minimum value or Total of
the summed values
Maximum value
Year Month Day Hour Minute
0
0 or 1
Year Month Day Hour Minute
A1
An
E1 F1 M1 Data N1
Data Nn En Fn Mn
Minimum value or Total of
the summed values A1 to An: Report channel number
(DR130:00H to 1DH, other: 00H to 3BH)
E1 to En:
Type of the report computation result to output
F1 to Fn: Report computation data status
M1 to Mn: Exponent of the dayly data
Data N1 to Nn: Mantissa of the dayly data
Power failure information on the dayly data
0: No failure 1: failure occurred
Date and time when hourly report data is created
Extended information
Output extension
number worth of
data
The meaning of each data is the same as the hourly report.
Note
• RF2 outputs data on the specified report channels.
7.13 Report Output Format