Yokogawa DAQWORX - Manual (Page 54)

54 IM WX1000-01E
Logging and Saving Data Using AddMulti
Drag to
select
Change the
group name
Increment button
Acquisition channel numbers are filled from the first cell in the selection to
the last, each channel being assigned a number +1 higher than the last.
7. Set groups 0, 03, and 04 in the same manner.
Click OK to save the settings.
8. Click the SCAN button. Data is acquired from DAQLOGGER.
9.
Start the monitor software. The specified group data is displayed in the
monitor.
Click to start the scan
Click to display the monitor