Yokogawa DAQWORX - Manual (Page 10)

10
IM WX1000-01E
Overview of DAQWORX Installation
The DAQWORX installer lets you do the following:
• Install the software
• Add or delete software
• Modify or repair a previous software installation
• Install software upgrades
It is recommended that you uninstall any previously installed DAQWORX
components before reinstalling. During installation, only the applications that you
specify are installed in the DAQWORX folder.
The DAQWORX folder can be installed in any location, but changing the structure
of the DAQWORX subdirectories may cause problems when adding, upgrading, or
deleting components.
When using Windows Vista and Windows 7, the software will not function normally
if installed in a subfolder of the Program Files folder. Also, when using Windows XP
or Windows 000, please do not upgrade to Windows Vista and Windows 7 if the
DAQWORX software is installed in a subfolder of the Program Files folder.
Your license numbers are recorded on the license sheet. Refer the numbers you
purchased when adding or changing software. Please keep your license numbers
in a safe place.
Note
Following message is shown when installer used in previous installation doesn’t support
OS language.
“The language between OS and installer is different. If you continue installation,
language used in software is not changed. If you want to adapt these language,
please uninstall software and install this software again.”
In order to adapt language of software to OS, please uninstall any previously installed
DAQWORX components and install again, otherwise language of software is not
changed.
Installation Guide