Yokogawa DAQWORX - Manual (Page 41)

41 IM WX1000-01E
Operation Guide
Appendix
Installation Guide
Setting Up the MX100
Setting the Acquisition Conditions
4. Click Acquisition and enter settings as follows:
Start Condition: On Record
Stop Condition: Continuous
Drag and drop the input module icons to appropriate interval groups.
Monitor interval of interval groups : 50 msec, 100 msec, and 00 msec
Record interval of interval groups : 1
Drag and drop
Set to 1 Select these option buttons
Setting the Channels
5. Click Channel. Then, select the check boxes for the channels you wish to
record on the Meas. Channel tab.
Select the check boxes for the
channels you wish to record
Click here to show the channels
corresponding to the unit in red
characters