Yokogawa ISC450 4-Wire Analyzer for Inductive Conductivity - Manual (Page 12)

4
IM 12D06D05-01E
N) Safety and EMC conforming standards ,
Safety : EN 61010-1
CSA C22.2 No.61010-1
UL 61010-1
FM3611 Class I, Div.2, Group ABCD,T6 for Ta -20 to 55ºC
EMC : EN 61326-1 Class A, Table 2 (For use in industrial locations)
EN 61326-2-3
EN 61000-3-2 Class A
EN 61000-3-3
Korea Electromagnetic Conformity Standard
Installation altitude: 2000 m or less
Category based on IEC 61010: II (Note)
Pollution degree based on IEC 61010: 2 (Note)
Note: Installation category, called over-voltage category, specifies impulse withstand voltage.
Category II is for electrical equipment.
Pollution degree indicates the degree of existence of solid, liquid, gas or other
inclusions which may reduce dielectric strength. Degree 2 is the normal indoor
environment.
CAUTION
This instrument is a Class A product, and it is designed for use in the industrial environment.
Please use this instrument in the industrial environment only.
O) Environment and operational conditions
Ambient temperature: -20 to +55 ºC (-5 - 130 ºF)
Storage temperature: -30 to +70 ºC (-20 - 160 ºF)
Humidity : 10 to 90% at 40 ºC (100 ºF) RH (non-condensing)
Data protection : EEPROM for configuration data and logbook. Lithium cell for clock
Watchdog timer : Checks microprocessor
Power down : Reset to measurement
Automatic safeguard: Auto return to measuring mode when touchscreen is untouched for 10
min.
Model and Suffix Codes [Style: S2]
Model Suffix code Option code Description
ISC450G ----------------- ----------------- Inductive conductivity Converter
Power - A
- D
-----------------
-----------------
AC version (100…240 VAC)
DC version (12…24 VDC)
Type - A
- U
-----------------
-----------------
General purpose version
FM version
Mounting Hardware
Hood
Conduit adapter
Tag Plate
/UM
/U
/PM
/H5
/AFTG
/ANSI
/AM20
/SCT
Universal mounting kit (panel, pipe, wall)
Pipe and wall mounting hardware (*2)
Panel mounting hardware (*2)
Awning hood (stainless steel) (*2)
G1/2 (*2)
1/2NPT (*2)
M20 (*2)
Stainless steel tag plate (*1)
*1 If the tag number is predefined with the purchase, Yokogawa will inscript the tag plate with the specified tag number, and
program the tag number in the converter.
*2 Option codes /U, /PM, /H5, /AFTG, /ANSI and /AM20 are not specified for FM version (-U).