Yokogawa Low Concentration (ppm) Zirconia Oxygen Analyzer OX400 - Manual (Page 16)

<2. Specifications>
2-5
IM 11M10B01-01E
Consumables
Item
Part no. and rating
Qt’y
Activated filter element kit (15 times replacement) K9643KK 1
Filter kit (5 times replacement) K9643KL 1
Sensor assembly (including O-ring) K9643KG 1
Snap ring (retainer) Y9011EV 1 (*)
Plate K9213FB 1 (*)
Filter K9643FB 1 (*)
Snap ring plier K9643ZE 1
(*) Qt’y of 10 pieces or more can be purchased.
2.5 External Dimensions
Panel mount type with built-in pump or no suction device (OX400----/P)
135
+2 0
101.6
±0.3
240 ±1
225 ±1
19.3 330 20 10 to 20
6
6
132
101.6
260
238
Seal
Ventilation
holes
Frame Frame
Screw
4xM5 screw
Panel Cutout
Mount
Note: Pump ON/OFF switch; when no suction device [-N] is specified for the sampling method,
this switch is not installed.
3. Make sure the panel is at least 2 mm thick.
2. Maintain at least 100 mm of free space around the measuring instrument in order to ensure
adequate ventilation.
1. Make sure the bottom supports do not block the ventilation outlet on the bottom panel of
the measuring instrument.
Notes on mounting
Unit: mm