Maple Systems Windows CE Embedded 6.0 Professional Edition - Manual (Page 34)

OMI5000 Series (Windows Embedded CE 6.0 Professional) Operating Manual 30
Maple Systems 1010-1016 Rev 00 www.maplesystems.com
Chapter 6 - Maintenance and System Configuration
Fuse Maintenance
The fuse used on OMI5000 Series Open HMIs is:
BUSSMANN GDB1
Fast Acting, Glass Tube
Rating: 250VAC, 1A
Size: 5x20mm
Make sure the power is off before replacing the fuse.
Do not replace the fuse with a fuse that has a different rating.
Cleaning the Overlay
Use a soft, lint-free cloth to gently wipe dust and debris off of overlay. Do not use alcohol or ammonia
based products to clean overlay. For hard-to-remove soil, use a damp soft cloth dipped in warm soapy
water. Be certain to wring out any excess fluid.