Maple Systems Windows CE Embedded 6.0 Professional Edition - Manual (Page 33)

29
Chapter 5 - Using Third Party Software
to Configure the OMI5000 Series Open HMIs
Maple Systems 1010-1016 Rev 00 www.maplesystems.com
Chapter 5 - Using Third Party Software
to Configure the OMI5000 Series Open HMIs
Indusoft WebStudio
Although you can use any application development software that is compatible with Windows CE
Embedded 6.0, Maple systems recommends WebStudio (with the processor set to ARMv4i). For more
information, visit our website at
www.maplesystems.com .
Other HMI Configuration Software
There are many companies that offer HMI configuration software that is compatible with Windows CE
Embedded 6.0. We have not tested any of this software with the OMI5000 Series Open HMIs. Below is a
partial list:

Iconics Embedded Genesis32

Rockwell RSView Machine Edition

GE Fanuc Proficy View Machine Edition

Any other product that can target a Windows CE 6.0 platform with an ARM v4i microprocessor.