Maple Systems Windows CE Embedded 6.0 Professional Edition - Manual (Page 20)

OMI5000 Series (Windows Embedded CE 6.0 Professional) Operating Manual 16
Maple Systems 1010-1016 Rev 00 www.maplesystems.com
Factory Configuration
What Comes with the OMI5000 Series Open HMI?
The OMI5000 Series Open HMI arrives from the factory with the following components:

One OMI5000 Series Open HMI, preloaded with Microsoft Windows CE Embedded 6.0, that
contains the following applications:
a. Internet Explorer v6.0
b. Windows Media Player
c. Word viewer
d. PDF viewer
e. Support for VBScript and MessageBox functions
f. Support for Remote Desktop Protocol (RDP)
g. ActiveSync

Installation Guide
Not included with the OMI5000 Series Open HMI:

HMI configuration software must be purchased separately. The OMI5000 Series can be
configured with any CE-compatible HMI configuration software, such as WebStudio.

Power supply and cabling must be purchased separately. Contact Maple Systems for more
information.

Development tools for creating Windows CE applications.
DIP Switch Settings
The following table shows factory-configured DIP switch settings of the OMI5000 Series. The switches
and reset button are underneath a moveable rubber cover. In the picture, the cover is moved to reveal
the switches and reset button. The reset button performs a reboot, the same as cycling power.
A switch is On when it is moved up,
towards the ON label. In the picture,
all switches are Off.