ADTRAN XRT - Manual (Page 73)

61200.153L1-13 Express XR/XRT Quick Start Guide 61
Appendix A. AT Commands and S-Registers
S58 ... CALL ................... Allows the Express XR/XRT to screen incoming
SCREENING calls.
0 = Answer any call
1 = Answer only calls from numbers matching
those stored in SN0 through SN9.
SS60 SPID1 LOC ......... SPID string location.
SS61 SPID2 LOC ......... SPID string location.
SS62 LDN1 LOC .......... ISDN phone number string location.
SS63 LDN2 LOC .......... ISDN phone number string location.
S65 ... AUTOSPID ........ Sets the AutoSpid determination feature.
0 = Disable (default)
1 = Enable
SS67 AREA CODE ...... Area code location.
S71 ... DTE RATE .......... Selects the DTE connector bit rate.
3 = 1200
6 = 2400
8 = 4800
11 = 9600
15 = 19200
17 = 38400
20 = 57600
23 = 115200
25 = 230400
S72 ... DATA BITS ........ Selects the number of asynchronous data bits.
0 = 8 bits
1 = 7 bits
S73 ... DTE PARITY ...... Selects the number of asynchronous parity bits.
0 = None
1 = Odd
2 = Even
S74 ... DTE STOP .......... Selects the number of asynchronous stop bits.
0 = 1 stop bit
1 = 1.5 stop bits
2 = 2 stops bits
S75 ... DTE FLOW ......... Selects asynchronous flow control.
0 = None
1 = XON/OFF from DTE controls DCE
2 = XON/OFF from DCE controls DTE