ADTRAN XRT User Manual
Page 28
Chapter 2. Installation
16
Express XR/XRT Quick Start Guide
61200.153L1-13
Figure 2-6
Express Configuration Wizard Connection Tab
4.
Check the power and the cable connections then select the
Auto-Detect
button. If the error message shown in
Figure 2-5 is displayed again, see the chapter Troubleshooting.
5.
Choose Wizard under the Configuration tab.
6.
Read the screen instructions and click NEXT.
7.
Verify the unit information and the COM port to which it is
connected are shown correctly; choose NEXT.
8.
Enter the area code and ISDN phone numbers provided by
the ISDN service provider. Since the ADTRAN Express XR/
XRT supports an Automatic SPID and Switch Detection
algorithm, this is all the information required.
9.
Click NEXT.
This manual is related to the following products: