ADTRAN XRT - Manual (Page 36)

Chapter 2. Installation
24 Express XR/XRT Quick Start Guide 61200.153L1-13
VT 100 Configuration
1. After connecting a VT 100 terminal enter the command
AT!V
followed by Enter. The Configuration screen is the
first screen displayed. An illustration of this screen is
shown in Figure 2-13.
2. Enter the area code.
3. Enter ISDN phone number 1.
4. Enter ISDN phone number 2.
5. Enable Auto-Detect SPIDs/Switch.
6. View the status by using the key sequence Ctrl+V. An
illustration of the status screen is shown in Figure 2-14.
Figure 2-13
VT 100 Terminal Configuration Menu