ADTRAN XRT - Manual (Page 54)

Chapter 4. Application Configuration
42 Express XR/XRT Quick Start Guide 61200.153L1-13
Creating a Custom Profile
1. In the ADTRAN Express Configuration window, create a
New
profile by choosing the New button and continuing
through the steps in this procedure or choose the Wizard
button and let the Express Configuration Wizard guide you
through the setup (skip the rest of this procedure).
2. Select an existing profile on which to base a new profile. To
view the settings for a profile, click on the name of the
profile and choose the Preview button.
3. Once the setup parameters are displayed under the ISDN
Line Setup
tab, select the text in the Name of Profile box
and enter a new name for the profile. For example: Joe's
Internet Connection.
4. Enter the following information (under the ISDN Line
Setup
tab) as provided by your telephone company:
Switch Type
Area Code
ISDN Phone Number(s)
Service Profile Identification Number(s)
If the service profile identifiers (SPIDs) and switch type are
unknown, check the box labeled Auto-detect SPIDs/Switch and
they are determined automatically once the OK button is selected.
5. After completing the parameters in the ISDN Line Setup
window, click on the Protocol tab.
6. The Call Type should only be changed to Data 56 kbps if
Data 64 kbps
is not available in your area.
7. Select PPP protocol if configuring for Internet access using
Chameleon (or other Internet access package), or select
Async BONDING
protocol if configuring for remote access
using ShivaRemote.
8. Choose the OK button. The new profile, now appears
alphabetically in the profiles list of the ADTRAN Express
Configuration Wizard window.