Alamo Interstater TS-100A - Manual (Page 68)

© 2004 Alamo Group Inc. Page 9 - 4
Interstater (NH TS-100A , 115A , 125A & 135A Asy. Manual) 06/04
New Holland TS115A/125A/135A Cab/2wd As of: 5-19-04
10.00-16SL (F-2) Min / 12.4-24 (R-1) Max Front Tire
18.4-30 (R-1W) Max Rear Tire
Mainframe: Dual Wing (5" Offset Left & Right) …….....……....... 02981078
Comp Crate: Dual Wing w/Aux Pump ……………………….........02981009
Comp Crate: Dual Wing w/Tractor Hyd …………………….......... 02981087
Replacement Fuel Tank (46 gal/Req’d for Dual) …………….....… 02980938
SPECIAL ORDER: For tractors with oversized tires (Ref: 14.9-24 Frt / 18.4-34 Rear)
Dealer/customer responsible for modifying the exhaust for transport clearance.
Mainframe: Right Hand Only (5" Offset Right) ……………….. 02981085
Comp Crate: RH Only w/Aux Pump ……….……………….....
Unreleased (As of this date)
Mainframe: Dual Wing (5" Offset Left & Right) …………....... 02981086
Comp Crate: Dual Wing w/Aux Pump …………..………….....
Unreleased (As of this date)
Replacement Fuel Tank (46 gal/Req’d for Dual) ….…………... 02980938
Options:
Lift Chain Kit (See Spec Below) ……………………………......... 02980514
Specifications:
1. These mount kits include exhaust modification kit #02980916 which allows the vertical A-post style exhaust
to be moved in approximately 6 1/2" for head transport clearance. In addition, a portion of the tractor’s
exhaust mounting bracket must be cut away to allow clearance for the path of the head lock-up lug. Notice:
The “special order” kits will not include a replacement exhaust. The dealer/customer will be responsible
for modifying the tractor’s original exhaust at their own expense.
2. As a result of the cylinder mount position on the right side, the battery support will no longer completely
hinge outward. However, the battery can still be accessed and even removed with the assistance of one
additional person. Notice: The “special order” kits will include a battery relocation bracket (See Figure
1), however it was designed for use with 18.4-30 rear tires only. Hence, the dealer/customer is responsible
for any necessary modifications.
3. For dual wing mowers, the factory installed fuel tank must be replaced with the one listed above to permit
clearance for the cylinder mount (See Figure 2).
4. Full Interstaters must be ordered with a 96" centered rear head. Right hand only models can be ordered
with a 96" centered or 88" offset right 8.5" rear head. Two lift chains are recommended for centered heads,
while offset heads should only be ordered with one.
5. The mainframe should allow approximately 10 3/4" of ground clearance with the maximum tire size
listed above.
6. As with most dual wing Interstaters, the left wing must be lowered for ingress/egress to the tractor
platform.
7. For dual wing models, the left hand tractor steps must be removed. A replacement step is provided with
the fuel tank kit. For dual and single wing models, the right hand steps must be removed for clearance
as well. Ingress/egress on the right is otherwise blocked by the control stand.
8. The pump mount in this kit is assembled with a carrier bearing to extend the life of the driveline and pulley
weldment.
9. Rear tires dimensionally larger than 18.4-30 may interfere with the replacement fuel tank and/or revised
battery box position. Adjusting the rear wheels to a “full spread” may resolve such issues, however this
has not been properly reviewed by our engineering team at this time.
Tractor / Mower Mounting Specifications
Continued Next Page