Alamo Interstater TS-100A - Manual (Page 34)

© 2004 Alamo Group Inc. Page 4 - 8
Interstater (NH TS-100A , 115A , 125A & 135A Asy. Manual) 06/04
Remote Control Cable Connections
Left Wing
"On" / "Off" Switch
Right Wing
"On" / "Off" Switch
Left Wing
Tilt Cyl
Control
Left Wing
Lift Cyl
Control
Right Wing
Lift Cyl
Control
Right Wing
Tilt Cyl
Control
Switch
Mounting
Brackets
12. Adjust Handles. The handles will have
some adjustment to the as the Mounting bracket
the handles bolt to will have slotted holes to allow
the handles to be rotated to position the handles
straight up. (See Figures 11, 26 & 27) Cab Model
Shown.
13. Tie Cables and Wire Harness together. Tie
the cables and Wire Harness together with plastic
ties inside the cab and outside the cab. This will
keep them from moving around. Cab Mdel Shown.
14. Control Valve Hydraulic Schematic. The
schematic shows the routing of hoses to the
cylinder control valve. The cables must be con-
nected in pattern as shown (See Figure 27 & 29)
in order for the proper function to match instruc-
tions. Cab or Rops model are the same (See
Figure 29)
Figure 27
Figure 26
Remote Control Cable Connections: (continued)