IEI Integration RPC-6010G - Manual (Page 58)

RPC-6010G Rackmount LCD Workstation
5.1 Maintenance Overview
Maintaining the RPC-6010G rackmount workstation is essential for the smooth operating
of system applications. Maintaining the system might mean replacing failed components
during the lifetime of the workstation. The following RPC-6010G components can be
replaced.
CPU card
PCI/ISA expansion card
Backplane
Power supply unit (PSU)
Cooling fans
Disk drives
o
3.5”
o
5.25”
WARNING:
Never attempt to remove the external panels or access any internal
components of the workstation while it is connected to a power source. Always
be sure to turn off and disconnect the workstation from all power sources
before attempting to access the internal components. Failure to do so may
seriously injury to the user or cause irreparable damage the internal
components of the workstation.
5.2 CPU Card Replacement
To replace a CPU card, please follow the instructions below.
Step 1:
Step 2:
Turn off and disconnect the workstation from all power sources.
Remove the workstation from the rack in which it is installed.
Page 48