IEI Integration RPC-6010G - Manual (Page 26)

RPC-6010G Rackmount LCD Workstation
3.3 ACE-832AP PSU Specifications
Table 3-3 lists the ACE-832AP power supply specifications.
INPUT Voltage 90 ~ 264VAC Full Range
Frequency 50 ~ 60Hz
Input Current 6A(RMS)@115VAC
3A(RMS)@230VAC
Inrush Current 60A Max for 115VAC
90A Max for 230VAC
OUTPUT Voltage Min. load Max. load Ripple & Noise
+3.3V 0.3A 28A 50mV
+5V 0.1A 30A 50mV
+12V 0A 15A 120mV
-5V 0A 0.3A 100mV
-12V 0A 0.8A 120mV
+5Vsb 0A 2A 100mV
Total Current of +3.3V & +5V & +12V ≦280W
GENERAL Power 300W
PFC Active
Hold-up Time 17ms minimum
Efficiency 65%
MTBF 50,000hrs
Temperature 0 ~ 50°C (Operating)
-20 ~ 80°C (Storage)
Dimensions 140 x 150 x 86mm
Table 3-3: ACE-832AP PSU Specifications
3.4 Recommended IEI Backplanes, Motherboards and PSUs
Refer to Appendix B for recommended IEI backplanes, motherboards and power supply
units for the RPC-6010G rackmount workstation.
Page 16