IEI Integration RPC-6010G - Manual (Page 33)

RPC-6010G Rackmount LCD Workstation
4.4 Installation Procedures
4.4.1 Preinstalled Components
The following components are preinstalled in the RPC-6010G rackmount workstation.
Power supply unit (PSU)
Cooling fan module
Drive bracket
LCD screen
4.4.2 User Installed Components
The following user supplied components need to be installed into the RPC-6010G
rackmount workstation:
Disk drives
Backplane and CPU card, or motherboard
PCI or ISA expansion cards (optional)
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Open the top cover.
Remove the CPU card clamp.
Remove the dual CPU card clamp and drive bay stabilizer bracket.
Remove the disk drive bracket.
Install the disk drives.
Reinstall the disk drive bracket with the installed disk drives.
Install the backplane.
Install the CPU card.
Install the PCI or ISA expansion cards (optional).
Page 23