IEI Integration RPC-6010G - Manual (Page 32)

RPC-6010G Rackmount LCD Workstation
4.3 Pre-installation Preparation
4.3.1 System Planning
User supplied CPU cards and backplanes or motherboards need to be installed in the
system before installing the RPC-6010G rackmount workstation.
The backplane determines the following system parameters:
CPU card type
Expandability
The CPU card determines the following system parameters:
CPU
Embedded graphics
System memory
HDD, FDD and optical drive connectivity and capacity
Speed
It is therefore proper to correctly specify the system before the system is installed. This
ensures that prudent selections can be made when the system is being developed.
4.3.2 Tools
Before installing the RPC-6010G rackmount workstation, make sure the following tools
are on hand:
Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
Soft working mat: When installing the RPC-6010G rackmount workstation,
the screen should be placed face down on a soft working mat.
Page 22