beautypg.com

Figure 4-13: slot cover retention screw – IEI Integration RPC-6010G User Manual

Page 46

background image

RPC-6010G Rackmount LCD Workstation

Figure 4-13: Slot Cover Retention Screw

Step 2:

Step 3:

Step 4:

Remove the CPU card clamp. (See Section 4.5.2)

Remove the dual CPU card clamp and drive bay stabilizer bracket. (See

Section 4.5.3)

Slide the CPU card into the reserved PCI/ISA socket on the backplane. Make

sure the back edge of the CPU card slides into the plastic guide rails at the front

end of the chassis.

Page 36

See also other documents in the category IEI Integration Computers: