4 cpu installation, Nstallation, Figure 3-5: cpu socket location – IEI Integration ECN-680A-H61 User Manual

Page 32: 4 cp u in s ta lla tio n

ECN-680A-H61 Em b e d d e d S ys te m

P a g e 18

S te p 8:

Install the fan module in the same position it was before and tighten the eight fan

bracket retention screws.

S te p 9:

Connect the fan connector (CPU_FAN1).

S te p 10:

Replace the cover and secure it using five previously removed retention screws.

3.4 CP U In s ta lla tio n

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU, please be careful not to damage it in anyway. Do NOT touch the

pins at the bottom of the CPU. When handling the CPU, only hold it on

the sides.

To install the CPU, please follow the steps below:

S te p 1:

Remove the top cover from the device. See Section 3.3.

S te p 2:

Remove the fan module. See Section 3.3.

S te p 3:

Locate the CPU socket (

Figure 3-5: CPU Socket Location