IEI Integration ECN-680A-H61 - Manual (Page 31)

ECN-680A-H61 Em b e d d e d S ys te m
P a g e 17
S te p 4: Lift the fan module out of the ECN-680A-H61 and locate the SO-DIMM socket
(
336H
Figure 3-3).
Figure 3-3: SO-DIMM Socket Location
S te p 5: Install the DDR3 memory module by pushing it into the socket at an angle
(
543H
Figure 3-4).
S te p 6: Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR3 memory module down (
544H
Figure 3-4).
S te p 7: Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR3 memory module in the socket.
Figure 3-4: DDR3 SO-DIMM Module Installation