C.2.5 create factory default image, Figure c-10: press f3 to boot into recovery mode, Figure c-11: recovery tool menu – IEI Integration ECN-680A-H61 User Manual

Page 155: C.2.5 )

ECN-680A-H61 Em b e d d e d S ys te m

P a g e 141

C.2.5 Cre a te Fa c to ry De fa u lt Im a g e

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

S te p 1:

Turn on the system. When the following screen displays (Figure C-10), press

the <F3> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure C-10: Press F3 to Boot into Recovery Mode

S te p 2:

The recovery tool menu appears. Type <4> and press <Enter>. (Figure C-11)

Figure C-11: Recovery Tool Menu

S te p 3:

The About Symantec Ghost window appears. Click OK button to continue.