IEI Integration ECN-680A-H61 - Manual (Page 25)

ECN-680A-H61 Em b e d d e d S ys te m
P a g e 11
2.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the ECN-680A-H61 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the ECN-680A-H61. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the ECN-680A-H61 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the ECN-680A-H61, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
ECN-680A-H61.
2.2 Un pa c kin g P re c a u tio n s
When the ECN-680A-H61 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section
333H
2.1.
 Make sure the packing box is facing upwards so the ECN-680A-H61 does not
fall out of the box.
 Make sure all the components shown in Section
334H
2.3 are present.