IEI Integration NOVA-PV-D4251_D5251 v1.10 - Manual (Page 98)

NOVA-PV-D5251/D4251 5.25" SBC
Page 82
Step 1: Insert into the socket at an angle. Line up the notch on the card with the notch
on the connector. Slide the PCIe Mini card into the socket at an angle of about
20º.
Step 2: Push down until the card clips into place. Push the other end of the card
down until it clips into place on the plastic connector. Step 0:
4.7.5 SATA Drive Connection
The NOVA-PV-D5251/D4251 is shipped with one SATA drive cable. To connect the SATA
drives to the connectors, please follow the steps below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2: Insert the cable connector into the on-board SATA drive connector. See
Figure 4-17.
Step 3: Connect the SATA power cable. Connect the SATA power connector into the
on-board SATA power connector. See Figure 4-17.
Step 4: Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-17.