IEI Integration NANO-QM57A - Manual (Page 90)

NANO-QM57A EPIC SBC
Page 78
5.4.1 Northbridge Configuration
Use the Northbridge Chipset Configuration menu (BIOS Menu 14) to configure the
Northbridge chipset.
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Chipset
Memory Information
CPU Type
Arrandale
Total Memory
1024 MB (DDR3 1066)
Memory Slot0
2048 MB (DDR3 1066)
Memory Slot2 0 MB (DDR3 1066)
CAS# Latency(tCL)
8
RAS# Active Time(tRAS) 20
Row Precharge Time(tRP) 8
RAS# to CAS# Delay(tRCD) 8
Write Recovery Time(tWR) 8
Row Refresh Cycle Timea(tRFC) 60
Write to Read Delay(tWTR) 4
Active to Active Delay 4
Read CAS# Precharge(tRTP) 5
Initate Graphic Adapter
[PEG/IGD]
IGD Memory [32M]
Select which graphics
controller to use as the
primary boot device.
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
BIOS Menu 14:Northbridge Chipset Configuration
Î Initiate Graphics Adapter [PEG/IGD]
Use the Initiate Graphics Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
ƒ IGD
ƒ PEG/IGD D EFAULT