IEI Integration NANO-QM57A - Manual (Page 27)

NANO-QM57A EPIC SBC
Page 15
The table below lists the connectors on the external I/O panel.
Connector Type Label
Ethernet connector RJ-45 LAN1
DVI-I (DVI-D + VGA) port DVI-I port VIDEO1
DVI-D port DVI-D port VIDEO2
Reset Switch Switch SW1
USB ports (dual) USB port USB0_1
USB ports (dual) USB port USB2_3
Table 3-2: Rear Panel Connectors
3.2 Internal Peripheral Connectors
The section describes all of the connectors on the NANO-QM57A.
3.2.1 Audio Connector
CN Label: AUDIO1
CN Type: 10-pin header (2x5)
CN Location: See Figure 3-2
CN Pinouts: See Table 3-3
The audio connector is connected to external audio devices including speakers and
microphones for the input and output of audio signals to and from the system.
Figure 3-2: Audio Connector Location