1 socket g cpu installation – IEI Integration NANO-QM57A User Manual

Page 46

NANO-QM57A EPIC SBC

Page 34

4.4.1 Socket G CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a socket G CPU onto the NANO-QM57A, follow the steps below:

WARNING:

When handling the CPU, only hold it on the sides. DO NOT touch the

pins at the bottom of the CPU.

Step 1:

Unlock the CPU retention screw. When shipped, the retention screw of the

CPU socket should be in the unlocked position. If it is not in the unlocked

position, use a screwdriver to unlock the screw. See Figure 4-1.