IEI Integration NANO-QM57A - Manual (Page 55)

NANO-QM57A EPIC SBC
Page 43
4.5.5 ME RTC Flash Security Override Jumper
Jumper Label: JP1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-6
Jumper Location: See Figure 4-10
The ME RTC Security Override jumper protects or overrides the ME RTC Flash security
registers. The ME RTC Security Override jumper settings are shown in Table 4-4.
Setting Description
Open Flash Security On Default
Short Flash Security Override
Table 4-6: ME RTC Security Override Jumper Settings
Figure 4-10: ME RTC Security Override Jumper Location
4.6 Chassis Installation
4.6.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the NANO-QM57A must have air
vents to allow cool air to move into the system and hot air to move out.
The NANO-QM57A must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual