IEI Integration NANO-QM57A - Manual (Page 43)

NANO-QM57A EPIC SBC
Page 31
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
NANO-QM57A may result in permanent damage to the NANO-QM57A
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the NANO-QM57A. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the NANO-QM57A or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the NANO-QM57A, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
NANO-QM57A.
ƒ Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.