IEI Integration NANO-QM57A - Manual (Page 75)

NANO-QM57A EPIC SBC
Page 63
5.3.3 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 5) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Port0
Not Present
SATA Port1 Not Present
SATA Port5 Not Present
SATA Mode
[IDE Mode]
Serial-ATA Controller 0 [Enhanced]
Serial-ATA Controller 1 [Enhanced]
(1) IDE Mode. (2) AHCI
Mode. (3) RAID Mode.
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
Î SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.
Î
Disable Disables SATA devices.
Î
IDE Mode D EFAULT Configures SATA devices as normal IDE device.
Î
AHCI Mode Configures SATA devices as AHCI device.
Î
RAID Mode Configures SATA devices as RAID device.
Î Serial-ATA Controller 0/1 [Enhanced]
Use the Serial-ATA Controller option to configure the Serial-ATA controller mode when
the SATA mode is set to IDE Mode.
Î
Disable Disables Serial-ATA controller.