beautypg.com

2 lan connection (single connector), Figure 4-15: dvi connector – IEI Integration NANO-QM57A User Manual

Page 62

background image

NANO-QM57A EPIC SBC

Page 50

Figure 4-15: DVI Connector

Step 4:

Secure the connector. Secure the DVI-I connector from the digital display

device to the external interface by tightening the two retention screws on either

side of the connector.

Step 0:

4.8.2 LAN Connection (Single Connector)

There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to

an external network. To connect a LAN cable with an RJ-45 connector, please follow the

instructions below.

Step 1:

Locate the RJ-45 connectors. The location of the LAN connector is shown in

Chapter 4.

Step 2:

Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the NANO-QM57A. See Figure 4-16.

See also other documents in the category IEI Integration Hardware: