IEI Integration NANO-QM57A - Manual (Page 40)

NANO-QM57A EPIC SBC
Page 28
Pin Description Pin Description Pin Description
C1 Analog Red -- -- -- --
C2 Analog Green -- -- -- --
C3 Analog Blue -- -- -- --
C4 Analog Horizontal Sync -- -- -- --
C5 Analog GND -- -- -- --
Table 3-16: DVI Connector Pinouts
3.3.2 Ethernet Connector
CN Label: LAN1
CN Type: RJ-45
CN Location: See
5
Figure 3-15
CN Pinouts: See
5
Table 3-17
The NANO-QM57A is equipped with two built-in RJ-45 Ethernet controllers. Each
controller can connect to the LAN through one RJ-45 LAN connector.
PIN DESCRIPTION PIN DESCRIPTION
1 LAN1_MDI0P 2 LAN1_MDI0N
3 LAN1_MDI1P 4 LAN1_MDI1N
5 +VCT_LAN1 6 GND
7 LAN1_MDI2P 8 LAN1_MDI2N
9 LAN1_MDI3P 10 LAN1_MDI3N
Table 3-17: LAN Pinouts
The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green
LED indicates activity on the port and the yellow LED indicates the speed. See
5
Table
3-18.