3 basic installation, 1 socket lga1155 cpu installation, Asic – IEI Integration IMB-H610A User Manual
Page 64: Nstallation, 3 ba s ic in s ta lla tio n
IMB-H610 Mic ro -ATX Mo th e rb o a rd
P a g e 49
4.3 Ba s ic In s ta lla tio n
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
IMB-H610 and other electronic components attached to the system
may be incurred. Running a CPU without a cooling kit may also result
in injury to the user.
The CPU, CPU cooling kit and DIMM are the most critical components of the IMB-H610. If
one of these component is not installed the IMB-H610 cannot run.
4.3.1 S o c ke t LGA1155 CP U In s ta lla tio n
NOTE:
To enable Hyper-Threading, the CPU and chipset must both support it.
WARNING:
CPUs are expensive and sensitive components. When installing the
CPU please be careful not to damage it in anyway. Make sure the CPU
is installed properly and ensure the correct cooling kit is properly
installed.
DO NOT touch the pins at the bottom of the CPU. When handling the
CPU, only hold it on the sides.
To install the CPU, follow the steps below.