IEI Integration IMB-H610A - Manual (Page 155)

IMB-H610 Mic ro -ATX Mo th e rb o a rd
P a g e 140
S te p 3: The recovery tool setup menu is shown as below.
Figure B-3: Recovery Tool Setup Menu
S te p 4: Press <5> then .
Figure B-4: Command Mode
S te p 5: The command prompt window appears. Type the following commands (marked
in red) to create two partitions. One is for the OS installation; the other is for
saving recovery files and images which will be an invisible partition.
(Press after entering each line below)
system32> diskpart
DISKPART> list vol
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> create part pri size= ___
DISKPART> assign letter=F
DISKPART> exit
system32> format N: /fs:ntfs /q /y