IEI Integration HYPER-KBN - Manual (Page 57)

HYPER-KBN
P a g e 45
Figure 4-7: USB Connector
4.6 He a t S in k En c lo s u re
WARNING:
Never run the HYPER-KBN without the heat sink secured to the board.
The heat sink ensures the system remains cool and does not need
addition heat sinks to cool the system.
The HYPER-KBN is shipped with a specific heat sink module and four retention screws,
four hex head studs and four intermediate poles. To install the heat sink module, see
Figure 4-8 below.