B.5 recovery tool functions, Ecovery, Unctions – IEI Integration HYPER-KBN User Manual

Page 112: Figure b-33: recovery tool main menu, B.5 re c o ve ry to o l fu n c tio n s

HYPER-KBN

P a g e 100

B.5 Re c o ve ry To o l Fu n c tio n s

After completing the initial setup procedures as described above, users can access the

recovery tool by pressing <F3> while booting up the system. However, if the setup

procedure in Section B.3 has been completed and the auto recovery function is enabled,

the system will automatically restore from the factory default image without pressing the

F3 key. The recovery tool main menu is shown below.

Figure B-33: Recovery Tool Main Menu

The recovery tool has several functions including:

1. Factory Restore: Restore the factory default image (iei.GHO) created in

2. Backup system: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

3. Restore your last backup: Restore the last system backup image

4. Manual: Enter the Symantec Ghost window to configure manually.

5. Quit: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.