3 so-dimm installation, So-dimm, Nstallation – IEI Integration HYPER-KBN User Manual

Page 50: Figure 4-1: so-dimm installation, 3 s o-dimm in s ta lla tio n

HYPER-KBN

P a g e 38

4.3 S O-DIMM In s ta lla tio n

WARNING:

Using incorrectly specified SO-DIMM may cause permanently damage

the HYPER-KBN. Please make sure the purchased SO-DIMM

complies with the memory specifications of the HYPER-KBN.

SO-DIMM specifications compliant with the HYPER-KBN are listed in

the specification table of Chapter 1.

To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.

Figure 4-1: SO-DIMM Installation

S te p 1:

Locate the SO-DIMM socket. Place the board on an anti-static mat.

S te p 2:

Align the SO-DIMM with the socket. Align the notch on the memory with the

notch on the memory socket.

S te p 3:

Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)

S te p 4:

Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See