B.6.3 configure one key recovery server settings – IEI Integration HYPER-KBN User Manual

Page 120

HYPER-KBN

P a g e 108

Debian

Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by

adding “#”.

#vi /etc/inetd.conf

Modify:

tftp dgram udp wait root /usr/sbin....... (as shown below)

#vi /etc/xinetd.d/tftp

B.6.3 Co n fig u re On e Ke y Re c o ve ry S e rve r S e ttin g s

S te p 1:

Copy the Utility/RECOVERYR10.TAR.BZ2 package from the One Key

Recovery CD to the system (server side).

S te p 2:

Extract the recovery package to /.

#cp RecoveryR10.tar.bz2 /

#cd /

#tar –xvjf RecoveryR10.tar.bz2

S te p 3:

Copy “pxelinux.0” from “syslinux” and install to “/tftboot”.

#cp /usr/lib/syslinux/pxelinux.0 /tftpboot/