Vanguard CT-7500 - Manual (Page 18)

MODEL CT-7500 OPERATING INSTRUCTIONS
12
Rev 2 Jan 2001
7.5 Replacing CT-7500 Thermal Paper
The thermal paper roll is residing in the pocket under the printer cover. To replace the
thermal paper roll, follow these steps:
„ Remove printer cover.
„ Remove leftover thermal paper roll from paper holder.
„ Unroll new thermal paper roll.
„ Feed thermal paper into the slot between the paper pocket and roller.
The printer will pull paper under the thermal head.
„ Roll thermal paper roll and place this paper roll in paper holder.
„ Lift thermal head and align thermal paper if necessary.
„ Reinstall printer cover.
Note
Thermal paper will show a red stripe to indicate “Close to End of Paper”.
7.6 CT-7500 LCD Contrast Control
To Darken the LCD display, press and hold the “↑ PAPER LCD” switch for two seconds; to
lighten the LCD display, press and hold the “↓ PAPER LCD” switch for two seconds.