Teledyne LeCroy TA700 Compliance User Guide - Manual (Page 4)

Pass/Fail
Pass/Fail of a test does not necessarily depend on Yes/No responses, some devices may be designed not to
perform certain functions. Therefore the user must study the test response and compare it with its device
specifications to see if it is okay or not.
In order to understand why TA660 reported a Yes or No response users may double click on the desired
test title (on the screen display not the saved test report), BA-01 in this case, and a data display will open
up corresponding to this test indicating the captured TA660 interaction with the IUT device. Most cases if
the response has been No the trigger position will be on the transaction that has caused the No response.
Compliance Test
4 Rev. 1.0