Teledyne LeCroy TA700 Compliance User Guide - Manual (Page 11)

• MP_06
Once the IUT asserts IRDY# it never changes FRAME# until the current data phase
completes. (3.2.1)
In this test a memory read command with three data phases must be executed by IUT.
• MP_07
Once the IUT asserts IRDY# it never changes IRDY# until the current data phase completes.
(3.2.1)
Part of MP_06 test group.
• MP_08
IUT never uses reserved burst ordering (AD(1:0)=B'01'). (3.2.2)
In this test a memory read command with two data phases must be executed by IUT. The memory
address of this test is incremented by one, e.g. 10000001H.
Compliance Test
11 Rev. 1.0